Jet Shades, LLC

Fly Cool in the Shade

You are here: Home / Experimental / Light Sport / RV-14 Tip Up Canopy Ultra-Thins Kit
Van's RV-14 Tip Up Canopy Ultra-Thins Kit
Jet Shades Block More Heat
Jet Shades Sun Protective Benefits

RV-14 Tip Up Canopy Ultra-Thins Kit

$799.00 – $999.00

“Jet Shades make an incredible difference in my Van’s RV! The reduction in glare and temperature is remarkable!” – J. Shealey, Owner

Cockpit Sun Protection that Ends the “Greenhouse Effect” in Your RV!

Designed for in-flight use Ultra-Thins significantly reduce heat, glare, UV radiation, & much more! These multitasking Jet Shades eliminate the sun beaming in — leaving pilots and passengers feeling refreshed and wondering how they ever flew without them. Leave them in while parked to protect your aircraft interior and reduce inside temperatures.

ultra-thins icons
SKU: UT-RV14 Categories: , ,

Cool, Comfortable Cockpits Under the Canopy!

While Van’s RV aircraft provide spectacular, unrestricted views through the canopy, solar energy and heat beaming through the canopy can sap the enjoyment out of flying — not to mention the glare and nonstop UV exposure that is soaking all on board!

With our patent-pending design, Jet Shades for Van’s Aircraft canopies solves the problem of hot, sunny trips with a uniquely designed product that will have you on cloud nine!

Made with a highly-engineered material that bends and flexes to fit your entire canopy, weighs less than four pounds, and is precut for easy installation, Jet Shades will:

  • Reduce Cockpit Temperatures by 15-25° F: Makes flying a comfortable and enjoyable experience for everyone on board.
  • Block 99.9% Harmful Solar Energy: Protects skin and eyes from dangerous UVA & UVB radiation.
  • Cut Sun Glare, Maintain Clear Visibility: Reduces glare while preserving unhindered visibility through the side canopy, ensuring safer navigation.
  • Minimize Eye Strain & Pilot Fatigue: Reduces the impact of prolonged exposure to sunlight for a more comfortable flight.
  • Eliminate Time-Consuming Foil Guards: Keep your Jet Shades in while parked to protect your aircraft interior and reduce inside temperatures.

Already have a fabric pull shade? Not to worry! Jet Shades will still attach with our mounting kit above the fabric shade and provide protection down the sides as well. Check out our video of Jet Shades installed in an RV-9 tip up canopy outfitted with a fabric pull shade.

Jet Shades for RV6,7,9 Tip Up Canopy
RV-7 with tip-up canopy pictured

 

Jet Shades Sun Protective Benefits

A Must-Have for Hot, Sunny Flights

Jet Shades are thoughtfully designed with pilot and passenger comfort in mind. While other sun protection products focus mainly on blocking visible light, Jet Shades are built so you can enjoy complete protection without blocking your view, including:

  • 99.9% protection from harmful UVA/UVB radiation
  • up to 94% infrared heat blocked
  • as much as 80% glare reduction

This triple protection from the sun is a game-changer for:

  • individuals with fair skin and eyes
  • anyone prone to sunburn or has a history of skin cancer
  • families flying with children and pets
  • passengers who use electronic devices
  • anyone who feels uncomfortable in elevated thermal temperatures

3 More Reasons You’ll Love Jet Shades

Choose Your Installation Method

Jet Shades do not require special tools, advanced skills, or an STC. Following one of our two installation methods, they can be fit by any pilot, owner, or one of our dealers. Our innovative design tucks behind the trim or friction-fits using included window clips so it will never damage your windows. Unlike window tint, FAA-approved Jet Shades do not adhere to your aircraft windows so they can be removed as needed.

The One Sun Shade Solution That Does It All

While Jet Shades were born out of one pilot’s need for superior sun protection during flight, they can also be used to keep your aircraft cooler when parked on hot, sunny ramps. The premium mirrored finish shields the interior from solar damage and offers privacy by preventing visibility inside the aircraft. With Jet Shades you no longer need separate foil guards while parked.

Enhanced Ramp Appeal

Jet Shades are not only about protecting your cockpit with the best sun protection available; they’re also a stylish upgrade that turns heads on the ramp. Elevate this even further by customizing your Jet Shades with your name, tail number, or company logo, making your aircraft a true reflection of your personal style or brand identity.

Van’s RV-14 Tip Up Canopy Ultra-Thins Total Aircraft Kit

Van's RV-14 Ultra-Thins Total Aircraft Kit

Includes:

  • (2) High-Visibility or Premium Large Overhead Shades
  • (2) High-Visibility Side Canopy Shades
  • (2) High-Visibility or Premium Rear Window Shades
  • Installation Kit (includes mounting brackets, hook & loop fasteners, alcohol wipes, grease pencil, stickers, instructions)
  • Microfiber Cleaning Cloth

*NOTE: To ensure clear visibility and navigational safety, Pilot and copilot side windows are not available in premium finish.

Jet Shades™ products are precut to the ‘near-net-shape’ of specific aircraft model windows and may require trimming. See Installation for details.

Product Compatibility

This product is compatible with the following models:

  • Fits Van’s RV-14 with tip up canopy aircraft

If you have a different model Contact Us as we can still produce a set of Jet Shades for your aircraft.

Product Specifications

  • Blocks UV, infrared heat, solar energy, and glare (See Solar Protection Specs below)
  • Approximately 1/32 of an inch thick
  • Each Jet Shade weighs approximately 0.5 pounds
  • FAA Approved
  • Made from optical grade material
  • Bendable and ultra durable, and heat resistant to 200 degrees Farenheit
  • Two-year warranty against defects in material
  • 100% Made in the USA

Solar Protection Specifications

Premium Package

Jet Shades are renowned for delivering superior protection from solar energy and enhancing visibility. Opt for our Premium Package to experience the ultimate in heat, light, and glare-blocking protection during flight.

Feature Comparison

NOTE: To ensure clear visibility and navigational safety, Pilot and copilot side windows are not available in premium finish.

 

Add-On Options

 

Custom Monogramming/Logo

Add a unique, personal touch to your set of Jet Shades with custom monogramming, logo, or logo + monogram engraving. Please allow 1-3 additional days for the setup and production of your custom order.

Popular ways to personalize your set of Jet Shades include:

  • your name
  • call sign
  • tail number
  • company logo

Monogramming allows for a maximum of 18 characters including spaces (10 characters when accompanying a logo) and can be customized for the pilot and copilot side shades. All monograms will be etched in the script font shown in the accompanying image.

Logo engraving will be centered at the bottom of the Jet Shade. You will be prompted to upload your logo before adding this product to your cart. File upload requirements:  logos can be up to 5MB in size and uploaded in .PNG, .JPEG, .BMP, .TIFF, and GIF format. High resolution (300 dpi) is preferred. Logos will be etched on both pilot and copilot side shades.

Monogram and Logo FAQ

  1. Is it possible to get a custom monogram with more characters, a two-line monogram, or other special options?
    Special requests like this are not available online, but may be available by phone.
Custom monogramming options for Jet Shades

 

A Few Hours of Install = Endless Hours of Comfort

Jet Shades can be fit by any pilot, owner, or one of our dealers. No special tools are required, only a sharp pair of scissors. All Jet Shades include an installation manual for reference.

Not a do-it-yourself person? No problem! Jet Shades installation can be done by your aircraft mechanic, local shop, or one of our Jet Shades™ authorized dealers.

Each kit contains everything you need to fit and mount your Jet Shades in your RV aircraft. All you need is a little bit of time and a pair of heavy-duty scissors:

  1. Install the clips and brackets to your RV aircraft support bars.
  2. Fit and install the Jet Shades. Fit the large canopy shade first, followed by the windshield shade and side canopy shades. (See included manual for details.)
  3. Make any customizations to allow for antennas, GPS, etc., and you’re done!
 

Installation Help Videos

How to Install Jet Shades Rear Canopy Shades in RV Tip Up
This video also applies to Van’s RV-14.

YouTube player

RV Clip Placement
This video also applies to Van’s RV-14.

YouTube player
How to Keep the SUN OUT of Your VAN’S RV & LOVE FLYING This Summer!!

YouTube player

General

When parked on the ramp, how do Jet Shades compare to foil guards?

Jet Shades are designed for use during flight and can also stay in while parked on the ramp to protect the aircraft interior from excessive heat damage caused by harmful UV rays. While foil guards can be helpful, they are time-consuming and cumbersome and do not offer the benefit of blocking up to 94% infrared heat (Premium Version) and 99.9% UVA/UVB, the primary cause of cracked and faded interiors. Jet Shades keep the aircraft cooler than foil guards when parked on the ramp. 

What kind of UV radiation protection do Jet Shades offer?

  • UV-A is 320 nm to 380 nm - transmits through the atmosphere.

  • UV-B is 290 nm to 320 nm - partially absorbed by the atmosphere (ozone layer).

  • UV-C is 100 nm to 290 nm - absorbed by the atmosphere (ozone layer).

We test and report according to NFRC standards, these reference ISO9050:2003 as the method for measuring UV transmittance between 300 nm and 380 nm.

The UV transmittance of glazing is the fraction of the incident solar radiation transmitted by the glazing in the 300 nm to 380 nm range (UV-B range from 300 nm to 315 nm and UV-A range from 315 nm to 380 nm.)

Using the NFRC method, Jet Shades are 99% or greater, on average, in UV rejection.

Where can I find warranty information for my Jet Shades?

All Jet Shades come with a two-year warranty. A copy of our warranty is shipped with your Jet Shades, or you can view the warranty here.

I have factory-tinted cabin and skylight windows in my aircraft. Do I still need Jet Shades?

The short answer is Yes! Here's why: the factory-installed limo tint package blocks mostly light - not heat. When you add our Jet Shades premium, 76% of the heat BTU’s coming in from the tinted windows will be blocked, making for cooler, more comfortable trips. And, passengers can still enjoy the amazing views with the added peace of mind because Jet Shades also block 99.9% of harmful UV radiation — a must when traveling with light-sensitive passengers, children or pets.

Are Jet Shades FAA-approved?

Yes. Jet Shades™ went through the FAA process and obtained a PMA (Parts Manufacturing Authorization).  However, an STC is not needed as we are not modifying the aircraft in any way. 

Will Jet Shades damage the aircraft windows?

No.  It takes 205℉  to start damaging acrylic windows and much higher for glass windows.  Jet Shades, when installed correctly, significantly block UV/UVB and infrared rays and, unlike foil guards, do not generate windshield heat near this threshold. Jet Shades create a cooler, ambient interior temperature that preserves windows, window trim, and interior finishes. 

Can I use generic film on my aircraft windows? I’ve seen mentions of ‘aviation films.’

Only if you want to violate the FAA regulations and have your aircraft grounded on a ramp check or fail a pre-buy inspection. There is no ‘Aviation film’ that is approved for aircraft use as this would require an STC. Without an STC it is a violation to make modifications to an aircraft.  Films block emergency window viewing for safe egress at night which is a violation. Films cannot be ‘carried on and carried off ‘ each flight like a portable electronic device and are not loose equipment.  Not to mention the internal stress films put on aircraft windows as they shrink and expand.  There have been several documented window blowouts and very expensive repairs due to films.  To be very clear – films are not FAA-approved unless there is an STC to do so in your aircraft. 

I have Rosen Visors. Will Jet Shades interfere with these?

No.  The Jet Shades will not interfere with the Rosen Visor system.  You can still use the Rosen Visors with your Jet Shades installed. 

Material

Are Jet Shades the same window tinting film used in automotive car windows?

No. Jet Shades do not use automotive tinting film. The film you see in cars will blister, wrinkle, and separate over time due to temperature changes and humidity when attached to surfaces other than glass. The tinting material used in automobiles absorbs a significant amount of heat which could potentially damage aircraft windows. Additionally, Jet Shades has a proprietary, engineered process for applying and curing its unique optical quality film that caters specifically to the aircraft.  Note – Films should never be placed directly on aircraft cockpit windows – especially pressurized cabins. This can cause damage to the aircraft windows including cracking or blowouts of the cockpit windows.

Can I roll up my Jet Shades?

Jet Shades are flexible and can be rolled to about a 12” diameter circle without creasing.  Going smaller than that can cause damage to the Jet Shades. 

Will prolonged exposure to heat damage my Jet Shade?

Jet Shades are tested to withstand extreme heat up to 200℉  without bubbling, blistering, or delaminating.  

Will Condensation form on the Jet Shades?

In some conditions (usually at flight levels for longer periods of time) you may see condensation or frost develop on the Jet Shade.  This is perfectly normal and will not damage the Jet Shade.  If condensation or frost does appear on the Shade, we recommend you remove the panel from the window or windshield and set it aside.  The condensation or frost should quickly dissipate.

DO NOT attempt to remove your Jet Shades in flight unless the autopilot is verified as on and functioning or a qualified crewmember has control of the aircraft. 

How long will my Jet Shades last?

Both original Jet Shades, Generation Two, and Ultra-Thins Jet Shades were designed using technology estimated to provide 5 years of service when used and maintained following our instructions. Jet Shades come with a two-year warranty.

Generation Two and Ultra-Thins Jet Shades: While Jet Shades are flexible and will bend without breaking or shattering, they can still be creased if folded or rolled up. Therefore, Jet Shades should not be folded or rolled up into a circle smaller than 12” in diameter.

Original Jet Shades: While the Jet Shades are somewhat flexible and will bend without breaking or shattering, they can still be damaged from overbending. Jet Shades should not be flexed more than necessary to install and fit your aircraft's windows. Flexing or bending past 30 degrees, not removing them in heat conditions, and exposure to high humidity, all reduce the life of the product. We recommend you follow the instructions sheet provided for conditions requiring removal as well as storage to prolong the life of your Jet Shades.

Can Jet Shades crack or shatter?

No. Jet Shades are flexible enough that they will only crease and wrinkle.  They will not shatter or break. 

 

Installation & Fit

I have a Rail that my visor slides on around my side windows and front windshield. Will the Jet Shades work with this configuration?

Yes, the Jet Shade should be able to slide behind the rail and up against the window.  We have tested this on Eclipse, Citations, King Air, and other aircraft.  If you have a non-standard rail system that interferes with the Jet Shades, please let us know and we’ll help find a solution.

Do I have to change the weight and balance of my aircraft with the Jet Shades installed?

Each Jet Shades panel weighs approximately ½ pound depending upon its size.  A full set of Jet Shades installed in your aircraft can weigh from 3–12 pounds depending upon the number of windows involved.  Since they are not permanently fixed to the aircraft they should be considered in the weight and balance calculation before each flight just as any other carry-on material would be. 

 

What should I do if I am having trouble fitting my Jet Shade into my window?

If you are having trouble fitting Jet Shades into your windows, please contact us. We can determine if it is an installation issue or if we need to create an update to the shade design; or possibly, the Jet Shades you received did not match the pattern of your aircraft and the shades need to be swapped; or we can direct you to one of our Authorized Dealers. Whatever the issue is, we will work with you until resolved. 

Note – there are many videos on our YouTube channel showing Installations.  This may resolve issues as well. 

How do Jet Shades attach to the window?

There are several different methods for installing Jet Shades depending upon your aircraft and the product line.  On most piston propeller aircraft using our Ultra-Thin product line the Jet Shades slide between the aircraft window trim and window or are trimmed to fit the window exactly and rubber edging is applied.  Mounting clips (provided) are attached to the windowpane and the Jet Shades panels are secured by pressing them into the clips. Gen2 Professional Series has a unique mounting system for Turboprops and Jets that provides an ultra-clean look and allows for easy installation of the Jet Shades during flight. 

How can I tell if Jet Shades will fit my aircraft?

On each product page, you will find a Compatibility Chart that states which aircraft the product will fit. If you don’t see your aircraft on our site, please contact us.  Most likely, we can custom-make one for your aircraft or send you a DIY kit. 

Do Jet Shades attach to the aircraft window like a cling-on film or use suction cups?

No. Jet Shades do not "stick" or attach in any way to the aircraft window and no suction cups are used.  Our securing mechanism allows Jet Shades to fit into the windowpane and cover the window without attaching to it.  Therefore,  you never have to worry about costly damage due to adhesive films (which can also be a violation of the FAA regulations) or suction cups that restrict window expansion and contraction during flight. 

Use, Cleaning & Storage

Can I leave Jet Shades in my windows when parked?

Jet Shades has a one-of-a-kind formulation that reflects most heat and absorbs only a small portion. They can remain in the windows while parked under most environmental conditions.

Generation 2 Jet Shades: Gen 2 Jet Shades are tested up to 200 degrees F and can stay in while parked. They will protect your aircraft interior from damaging UV as well as block more than 80 percent of Infrared heat. The result is foil guards can stay in the hangar, as they are not needed in the aircraft anymore.

Original Jet Shades: The Jet Shades will become about 20 – 30 degrees warmer than the interior temperature of your aircraft. In some climates, the interior could get over 140 degrees while parked, which may cause thermal expansion in the Jet Shade. Therefore, when the outside temperature exceeds 90 degrees while your plane is parked outside in the sun for over 2 hours, remove your Jet Shades from the windows.

What should I do if the Jet Shades get wet?

Immediately wipe them off with a soft cloth towel.  Do not let the Jet Shades stay in moisture for any period of time.  Always keep Jet Shades dry for best performance.

How should I store my Jet Shades when not in use?

The safest place to store Jet Shades is in the microfiber Jet Shade case included with most orders. Jet Shades that do not have a case are best stored in a clean dry place and kept in a low traffic area to prevent scratching. In areas with high humidity or significantly high temperatures (over 90*F) it is best to remove the Jet Shades into a lower humidity environment.

What if it gets dark or goes from day to night while flying? Can I remove my Jet Shade in flight?

Yes, Jet Shades are easily removed while flying with the Autopilot engaged.  The included instruction manual provides directions for easy removal.  We also note that the autopilot is verified as on and functioning, or a qualified crew member has control of the aircraft during the removal of your Jet Shades.

Can I use foil guards with Jet Shades?

No, Jet Shades cannot be used at the same time as foil guards. Foil guards are not needed when Jet Shades are installed and can scratch the Jet Shades when inserting and removing them.

How do I clean my Jet Shades?

Jet Shades have a coating system that is applied to the surface of each panel that faces outward. For that reason, Jet Shades have both left and right orientations in the cockpit windows. To ensure the integrity of your Jet Shades, they must be cleaned properly and carefully to avoid damage.

For a light cleaning (such as removing fingerprints), simply wipe with a clean, microfiber towel. To remove heavier buildup, use approximately 1 tablespoon of baby shampoo per half gallon of water and dampen the microfiber towel with the cleaning solution. You can place the Jet Shade briefly under running water then blot with a paper towel or microfiber cloth. It is not recommended to submerge or soak the Jet Shades. Alternatively, you can use 70% isopropyl alcohol. Wet a microfiber cloth with alcohol and wipe the shade.

If Jet Shades can stay installed when parked, why would I need a storage case?

When flying at night you should remove the shades and place them in the polybag provided and stow them behind the pilot seat or in the cabin for quick access. The main use of the storage case is when the plane goes into maintenance. We have had damage to Jet Shades reported as technicians did not know how to handle them properly. Therefore we recommend you remove your Jet Shades and place them in the storage case when you bring your aircraft in for maintenance. If your Jet Shades package did not include a storage case, they can be purchased separately on our website.

Jet Shades Product Warranty

Jet Shades come with a two-year warranty on manufacturer’s defects. The warranty period begins from the date of shipment. Jet Shades warranty does not cover scratches that have occurred during use or improper use of Jet Shades as described in the Jet Shades instruction manual.

All warranty work is done directly through Jet Shades. Jet Shades customers or authorized dealers should submit warranty requests through the website contact form. Each Jet Shade product features a serial number located on the front page of the instruction manual. This number is required to process any warranty claim.

Our customer care team will process the request and issue a Return Merchandise Authorization (RMA) number that should be referenced when shipping your product to us. Customers are responsible for shipping products back to Jet Shades. Upon receipt and inspection, Jet Shades will ship a replacement.

Note – Jet Shades are scratch-resistant: they are not scratch-proof. Please handle Jet Shades carefully when removing and installing.

Last updated: January 1, 2022

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

The Jet Shades Story

The idea for Jet Shades was born in 2017 when a private pilot/engineer who constantly struggled with hot, uncomfortable flights finally had enough. He wanted to enjoy flying without having to resort to temporary or unsightly hacks to block the heat and glare. Utilizing his engineering background, he tested various materials and installation methods that could be FAA approved and ultimately resulted in the creation of a virtually unbreakable, eye-catching window panel that blocks UV, heat, glare and solar energy while providing maximum visibility for pilots. Jet Shades are available for cockpit and cabin windows in a growing number of aircraft types — including propeller, turboprop, jets, airliners and helicopters.

You may also like…

Related products